A Practical Picturesque Pipe Pot Rack

Some of you may have noticed our pot rack in pictures from previous posts. So here is our post telling you all about it!

Being an older home, there is a large window in the middle of the kitchen. Meaning there is not a whole lot of cabinet space (luckily there is a decently big pantry for food storage). And pots just seem to take up so much room in cabinets. If we had put them in the few cabinets we have, there would be no room for much else. In an old apartment we had a pot rack (just one of those small oval ones) and loved the way displaying our pots looked. Especially now that we have more appealing stainless steel pots. So thus the idea of a pot rack was born.

Traditionally people put pot racks over islands. Well we don't have an island in our kitchen so that idea was out. There are also wall mounted ones, except we don't have any open walls in our kitchen to hang one. Scratch that idea too. I've also seen over the stove. Well we have our microwave there. That idea wont work. In our apartment we had it hanging over the bar area. Well we just knocked out that wall to open up the room and hanging something would close it off again and cut up the kitchen. Nope not a good idea. Then came the idea of hanging a rack from the ceiling in front of the window. The window is essentially wasted space in a kitchen where storage space is in high demand.

So now the trick was trying to find/figure out a pot rack that would work in front of the window. Most of the commercially made ones were too small and/or too wide. Since the window is so large (about 5 feet wide) a small pot rack would just look off in front of it. Not to mention it wouldn't be able to hold all of our pots and pans. We also didn't want a oval/rectangular one since it would stick out from the cabinets and just look awkward in our opinions. So I came up with this idea of hanging a curtain rod from the ceiling. It would be able to be hung out from the window so any swinging pots wouldn't break the glass, be able to extend then entire width of the window, and not stick out from the front edge of the cabinets.

This post is starting to get a little wordy, so I'll cut to the chase. Hanging a curtain rod from the ceiling is a lot harder than one would think. So to Home Depot we went to figure out a plan B (or C or D... not sure where we were at this point). We ended up in the section with all the conduit. And came up with the idea of half inch conduit (seemed to be large enough to hold the weight spanning 5 feet but not too large to look bulky). A couple of elbows and floor flanges would attach all the pipes together into a U and to the ceiling.

We bought some large S-hooks for the pots to hang from. This ended up being a bit more work than expected since the opening was too small to get the hooks onto the pipe. After a bit of prying, we got them all open enough and onto the pipe.

Last step was hanging the pots.

We think it looks great in the room. Give some purpose to the space of the window and a bit of sculptural art. It also adds a bit of industrial to the kitchen/house.

A New Look For The New Year

I apologize to everyone who has been waiting ever so patiently (and those of you that haven't been so patient by yelling at me for a new post) that I haven't posted in a while. The holidays, a few parties, and just trying to get the house put together took a bit of a toll on us. And unfortunately the blog posting didn't happen. But since we've gotten a lot done around the house, this post is going to be a "where is it now" post. A tour of the house so far. And some of the things you see that I haven't specifically posted about I will try to write a post about at a later date.

(Note: please forgive any dust in the pictures. There was drywall work going on and that dust just gets everywhere)

Kitchen

Eating area in the kitchen

Under construction: Downstairs half bath/laundry room

Entry way

Living room

Dining room (thanks for all the housewarming wine!)

Upstairs second bathroom

Back room upstairs (it's amazing what a bit of orange glow and a putty knife can do to fix a floor)

Master bedroom

Master bathroom

Our brand new garage roof and fascia (thanks to everyone who contributed to it!)

Now You See [Through] It, Now You Don't

Our front door has a large window in it (it takes up about half of the door). It is great for letting in light to the entry, but not the best for privacy. From the front porch you could see all the way through the hall and kitchen to the back of the house. So to solve the privacy problem, I frosted the window.

But just solid frosting is boring. So I wanted to bring a little clear glass into the design. We decided to go with an outline to sort of mimic the stain glass window next to the door. We also thought it would be nice to incorporate something such as "welcome" or the house number. Well, since the house number is on the front of the house twice already (under the stain glass window above the mailbox and also on the porch light), we went with "Welcome".

The process started by taping out the design we wanted to stay clear. I used blue painters tape for the outline and contact paper for the welcome part. Once the writing was on level, I had the tedious task of cutting out each letter.

After plastic-ing around the door, I used a spray paint froster (Krylon Frosted Glass Finish). It went on a little spotty after the first coat. But after a second and real light third it evened out.

And the finished product:

Edit: By request, here is the door from the outside!

Backsplash Bonanza

We finally have a backsplash! It was a decently long process, but well worth it. We decided to go with something a little different from the traditional tile and went with "tin" tile (it was actually a plastic, making it easier to work with).

The first step was to prime the tiles (two coats) so the paint would hold and not peel off when wiped down.

Then two coats of cream colored paint.

We then sanded them down to give them a bit of an old, distressed look.

Installing them was super easy. They cut with just a pair of scissors and went up in no time.

We love how it turned out! Unique and unexpected, but looks great! And it was definitely an easy DIY project for anyone, no matter how handy (or unhandy). So hopefully we can inspire others to think about a tin backsplash instead of typical tile... maybe?

It's Beginning To Look A Lot Like Christmas

Over the last couple weeks, we picked up some more Christmas decorations. Some stockings, a wreath, some ribbon (to add to the wreath), greenery for the porch steps, and lights for outside.

The stockings we hung on our stair rail. We don't have a fireplace to hang them from the mantle, but we think they fit perfectly on the stairs. And yes we got three (cause the spoiled puppy has to have one too).

We bought four pots for the stairs to our porch months ago for flowers. Well its been a tad cold for flowers since we moved in, so they've been empty. And just looked a bit sad. So a trip to Joann later and we had some faux greenery (yes faux... its too cold for much else to last outside through the winter and this way we have for next year too). I ended up cutting all of the stems and redoing arrangements to make them look a bit fuller in the pots. And now the pots don't look so sad on the steps.

And our wreath. I had these grand plans of making my own with pipe insulation and burlap and ribbon. I even had everything in my cart shopping except the burlap when I found a pre-made wreath. It's not burlap but I thought it was amazing and had to have it instead. So back went the pipe insulation. But I kept the ribbon to add to the pre-made wreath to give it a bit more oomph. Using the clever trick of an upside down 3M hook on the inside of the door, the wreath hangs outside and looks amazing.

To top off the Christmas decor, Kevin also hung some lights in the front windows and around the porch area. With all the decorations and a little gift shopping this weekend, we're definitely feeling the holiday spirit!

Let There Be Light

We replaced almost every light in the house with new, slightly more modern ones. Partly because they were just a tad ugly (in our opinions). But also because they were quite old and the wiring was a tad shoddy. The only one we kept was the dining room. Not because we really liked it. But because I had this crazy idea of spray painting it (props to Pinterest, where I spend way too much of my very little free time).

So the longer than expected process began.

Since we weren't figuring we'd need to take the light down for anything, I built a ridiculous spray painting shelter around the chandelier. It involved hanging plastic from the ceiling around 3 sides of the chandelier, a drop cloth on the table below, and more plastic on the front open side below the chandelier. I taped over the chain and wiring so that didn't get sprayed and removed all of the hanging crystals.

Then came one coat of primer and two coats of color. And some new shades. Everything was looking great to put the chandelier back together.

Except then Kevin noticed some of the wires were fraying. As he looked further, more and more of the wiring was shot (probably why we didn't use most of the other light fixtures in the house). So he then had the fun task of rewiring the light. And my shelter idea to not have to take down the chandelier was kind of ruined. Not only did we have to take it down, but it was disassembled into pieces. But hey at least we know the wiring is safe.

To top off the new look, we got new shades. It looks like a completely different chandelier!

Hang Up Your Coat And Stay A While

So we (or more so I) have had some crazy ideas for decor and repurposing stuff around the house. We had this dresser in the master bedroom closet that just didn't work. The drawers didn't slide and it just was taking up a ton of space. So when redoing the closet, we pulled it out. And it was then I came up with an idea to reuse the drawer fronts for a coat rack.

First step was to get the drawer fronts detached from the rest of the drawer. Luckily with a couple hits of the hammer, they popped right off. Then hooks were attached.

The original plan was to hang them on the wall with plugs for strength. But the plaster walls and my plugs didn't seem to want to get along this time. So after some nice holes were put in the wall, plan A was scrapped.

Plan B consisted of attaching a board to the wall with toggle bolts then attaching the drawer fronts to that board. I attached all five drawer fronts together with a couple boards to make it easier to hang and level. Note to self for the future: Menards has a crappy (non-existant) lumber department (normally I would have gone to Home Depot, but I was already at Menards because they have a better lighting department).

With a little decorating of the table top, the entryway is almost complete. Just need a rug and to frost the window on the door and we should be set. Maybe a little paint later on.